ICP DAS USA I-7083 User Manual page 30

2.6 ~AA1
: Reset the module status. The module status will be
Description
latched until ~AA1 command is sent. If the module status is not 0,
only ~AA1 command can clear the module status.
: ~AA1[chk](cr)
Syntax
~ is a delimiter character
AA=2-character HEX module address, from 00 to FF
[chk]=2-character checksum, if checksum disable
(cr)=0x0D
: valid command
Response
invalid command
no response
error or address error
! is a delimiter character indicating a valid command
? is a delimiter character indicating a invalid command
AA=2-character HEX module address
[chk]=2-character checksum, if checksum disable
(cr)=0x0D
Example
:
command: ~010(cr)
response : !0104(cr)
command: ~011(cr)
response : !01(cr)
command: ~010(cr)
response : !0100(cr)
I-7083/7083D/7083B/7083BD User Manual (V 1.1, Dec/2007) ------------------ 30
!AA[chk](cr)
?AA[chk](cr)
syntax error or communication
module status=0x04
clear module status
module status=0x00
no [chk]
no [chk]
host is down