Aagn - ICP DAS USA I-7083 User Manual

2.20 @AAGN

: Read the preset value of counter. The $AA6N
Description
command can reset counter to the preset value. Refer to Sec.
1.8.2 for more information.
: @AAGN[chk](cr)
Syntax
@ is a delimiter character
AA=2-character HEX module address, from 00 to FF
N=0 read counter 0
1 read counter 1
[chk]=2-character checksum, if checksum disable
(cr)=0x0D
: valid command
Response
invalid command
no response
error or address error
! is a delimiter character indicating a valid command
? is a delimiter character indicating a invalid command
AA=2-character HEX module address
(data)=8-character HEX value.
[chk]=2-character checksum, if checksum disable
(cr)=0x0D
Example
:
command: @01G0(cr)
response : !010000FFFF(cr)
command: @02G1(cr)
response : !0200000000(cr)
I-7083/7083D/7083B/7083BD User Manual (V 1.1, Dec/2007) ------------------ 44
!AA(data)[chk](cr)
?AA[chk](cr)
syntax error or communication
The preset value of encoder 0
is 0000FFFF.
The preset value of encoder 1
is 00000000.
no [chk]
no [chk]