ICP DAS USA I-7083 User Manual page 27

2.3 #**
Description: Synchronous read encoder.
Syntax: #**[chk](cr)
# a delimiter character
** synchronous read command
[chk]=2-charcter checksum, if checksum disable
(cr)=0x0D
Response: no response
Example:
command: $012(cr)
response : !01530600(cr)
command: #**(cr)
response : No response
command: $01Z0(cr)
response : >00000030(cr)
command: $01Z1(cr)
response : >00000031cr)
command: $01Z2(cr)
response : >00000032cr)
Refer to Sec. 1.8.1 for more information
I-7083/7083D/7083B/7083BD User Manual (V 1.1, Dec/2007) ------------------ 27
Synchronous latch the
encoder 0/1/2
Sync encoder 0=0x30
Sync encoder 10x31
Sync encoder 2=0x32
no [chk]