Introduction - ICP DAS USA I-7083 User Manual

1. Introduction

I-7000 is a family of network data acquisition and control
modules. They provide A/D, D/A, DI/O, Timer/Counter and other
functions. These modules can be remote controlled by a set of
commands. The common features of I-7083/7083B are given as
following:
3 axis, 32-bit encoder counter
Encoder counting mode: Cw/Ccw , Pulse/Direction, A/B Phase
Maximum counting rate: 1MHz
Encoder Input: A, B, Z differential
Input Level: 5V, 12V/24V with external resistor
A/B/Z signal isolation voltage: 2500V optical isolation
Built-in XOR logic for active high or active low encoder input
The I-7083B will save the counter value to EEPROM when the
power goes off. The 7083D & 7083BD equip a 7-Seg interface to
display encoder value & ABZ status one by one.
More Information
Refer to "I-7000 Bus Converter User Manual" chapter 1
for more information as following:
1.1 I-7000 Overview
1.2 I-7000 R
1.3 I-7000 C
1.4 I-7000 S
C
ONFIGURATION
1.5 I-7000 Dimension
I-7083/7083D/7083B/7083BD User Manual (V 1.1, Dec/2007) ------------------ 4
D
ELATED OCUMENTATION
F
OMMON EATURES
N
YSTEM ETWORK