Transmitting Artwork Data From Pc; For Windows Xp/Vista/7/8/8.1/10 - Riso GOCCOPRO QS200 User Manual

3) Transmitting Artwork Data from the
Computer
This section explains how to transmit the artwork data created on your computer to the machine. You can
change settings such as image quality using the printer driver before transmitting the data.
"Details of Printer Driver Settings" page 51
＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿
Windows XP/Vista/7/8/8.1/10
1
Create artwork data using an appropriate
application on your computer.
2
Proceed to the printing procedure to display
[Print] dialog box.
3
Select "RISO GOCCOPRO QS200 Driver" (name
of this machine) in [Printer Name].
Installation Procedure: Select the printer name
set on page 30
4
Click [Properties]
5
Set the image-making conditions.
(1) [Basic] tab:
Select the Screen frame size from the
pulldown menu.
Since [Register], [Edit], and [Delete] are
disabled during the printing procedure using
application software, make the settings on
[Devices and Printers] dialog box.
"Registering Screen Frame
Size" page 40
*) Preferable initial adjustment
• Image-making size and the artwork
size of editing data should be set to
be at least 160 mm (80 mm × 2)
shorter in both X and Y directions
than the outer sizes of the screen
frame.
An improper size setting may
damage the thermal print head
by contact with the screen frame.
• When the machine receives
multi-page artwork data, only the
first page is transferred onto a
screen, and the second and
subsequence pages are not
transferred. Please check the data
carefully before transmitting it.
• Only after the previous
image-making is completed, the
next artwork data can be
transferred.
"Details of Printer Driver Settings" page 51
｜47｜
2 How to Make Image on Screen
Make sure the current
image-making has been
completed and a new screen
frame has been set before
executing the transmission of the
next artwork data.