Offline Mode Operations - Riso GOCCOPRO QS200 User Manual

3 Offline Mode

Offline Mode Operations

＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿
Offline mode is used to reproduce an imaged screen by changing the detailed settings of the artwork data that
has been once used for image-making.
(1)
(1) When "Ready" is shown in the display of this
machine (in [Ready] status), press <ONLINE>
Key.
<ONLINE> Lamp goes out, the machine is
switched to offline mode, and the display
changes to "Setting."
(2) Use [▲] and [▼] keys (Selection Keys) for menu
selection.
(3) Press <ENTER> Key (Set Key) to confirm your
selection.
(4) To return to the upper menu, press <ONLINE>
Key.
(5) After the setting is completed, execute the
image-making in Reprint Mode.
When you turn off and on the machine or
execute Reset, the settings set in Setting
Mode will be restored to the default settings
without being stored in the machine. When
new artwork data is transmitted from the
computer, the old settings are overwritten
ONLINE
(2)
SETTING
because the settings of the computer's
printer driver take priority.
The settings set in Adjustment Mode are
retained in the machine even if you turn off
and on the machine or execute Reset. When
new artwork data is transmitted from the
computer, the settings are also reflected in
the computer's printer driver.
P r i n t
｜66｜
(3)
ENTER
Go to user setting menu.
Go to Image Remaking.
Go to Adjustment menu.
Go to Test Pattern
Image-Making menu.
Go to Reset.