JLG 260MRT Operation And Safety Manual page 42

1. Drive - This LED will illuminate when the drive select button
is activated.
2. Lift - This LED will illuminate when the lift select button is
activated.
3. Fuel Gauge - This series of LED's give the operator a visual of
the amount of fuel remaining.
4. Tilt Alarm Warning Light - This red warning light on the
control panel will illuminate when the chassis is on a severe
slope.
5. Engine/Filter Distress Light - This warning light, when illu-
minated, warns the operator of an engine or hydraulic sys-
tem fault condition. A bank of warning lights, located at the
ground control station, indicates the specific fault condition
to the operator. The indicator lights are: Alternator, Charge
Pressure, Engine Temperature, Oil Pressure, and Return Filter.
31215865
SECTION 3 - MACHINE CONTROLS AND INDICATORS
6. Leveling Jacks (retracted) - This set of lights will illuminate
once all the leveling jacks are retracted.
7. Leveling Jacks (extended) - This set of lights will illuminate
once all the leveling jacks are extended.
IF THE TILT INDICATOR WARNING LIGHT/ALARM IS ACTIVATED WHEN PLATFORM IS
RAISED, LOWER PLATFORM AND DRIVE TO A SMOOTH, FIRM SURFACE WITHIN THE
LIMITS OF THE MAXIMUM OPERATING SLOPE.
DO NOT OPERATE MACHINE IF HIGH DRIVE SPEED OPERATES WHEN PLATFORM IS
RAISED ABOVE THE STOWED POSITION.
3-11