JLG 260MRT Operation And Safety Manual page 27

SECTION 2 - USER RESPONSIBILITIES, MACHINE PREPARATION, AND INSPECTION
Begin the Walk-Around Inspection at Item 1, as noted on the dia-
gram. Continue to the right (counterclockwise viewed from top)
checking each item in sequence for the conditions listed in the
following checklist.
TO AVOID POSSIBLE INJURY, BE SURE MACHINE POWER IS "OFF" DURING WALK-
AROUND INSPECTION.
DO NOT OVERLOOK VISUAL INSPECTION OF CHASSIS UNDERSIDE. CHECKING THIS
AREA OFTEN RESULTS IN DISCOVERY OF CONDITIONS WHICH COULD CAUSE EXTEN-
SIVE MACHINE DAMAGE.
NOTE:
On each item, make sure there are no loose or missing parts, that
they are securely fastened, and that no visible damage exists in
addition to any other criteria mentioned.
2-6
1. Platform Controls - Properly secured, no loose or missing
parts, no visible damage. Placards secure and legible, control
switches return to neutral when activated and released,
emergency stop switch functions properly. Control markings
legible, manual in manual storage box.
2. Steer Linkage - See Note.
3. Wheels and Tires - Properly secured, no missing lug nuts.
Refer to section 6, Tires and Wheels. Inspect wheels for dam-
age and corrosion.
4. Drive Motor, Left Front (4 Wheel Drive) - See Note. No evi-
dence of leakage.
5. Drive Brake, Left Front (4 Wheel Drive) - See Note. No evi-
dence of leakage.
31215865