JLG 260MRT Operation And Safety Manual page 34

DO NOT OPERATE FROM GROUND CONTROL STATION WITH PERSONNEL IN THE PLAT-
FORM EXCEPT IN AN EMERGENCY.
NOTE:
When the machine is shut down for overnight parking or battery
charging, the EMERGENCY STOP and POWER SELECTOR switches
must be positioned to OFF to prevent draining the batteries.
1. Ground/Platform/OFF Key Selector Switch - A three posi-
tion, key-operated power selector switch supplies operating
power to the platform or ground controls, as selected. When
positioned to platform, the switch provides power to the
emergency stop switch at the platform controls. When posi-
tioned to ground, the switch provides power to the emer-
gency stop switch at the ground controls. With the power
selector switch in the center off position, power is shut off to
both platform and ground controls and the key can be
removed to disable the machine.
31215865
SECTION 3 - MACHINE CONTROLS AND INDICATORS
NOTE: With the Power Selector switch in the off position, the key can be
removed in order to incapacitate the machine on the jobsite to
avoid unauthorized use of the machine.
With the POWER SELECTOR switch positioned to GROUND,
ground functions will operate at low speed at all times.
NOTE: Low speed is the default speed for all functions. When the plat-
form is elevated, all functions operate in creep speed only.
2. Latch - Allows box to be opened and closed.
3. Circuit Breaker - This 10 Amp circuit breaker, located on the
left side of the platform control box, restores interrupted
power to the platform controls.
4. Alternator LED - Illuminates when the alternator drops
below a pre-set level.
5. Oil Pressure LED - Illuminates when the engine oil pressure
drops below 7 psi (0.48 bar).
6. Glow Plug Switch (Diesel Engine Only) - A momentary
contact, push button type switch that supplies electrical
power to the engine's glow plugs, when depressed, to assist
cold starting.
7. Coolant Temperature LED - Illuminates when engine cool-
ant temperature becomes overheated.
3-3