JLG 260MRT Operation And Safety Manual page 37

SECTION 3 - MACHINE CONTROLS AND INDICATORS
1. Start Switch - A momentary contact, push button type
switch that supplies electrical power to the starter solenoid
when the emergency stop switch is in the on position and
the start button is depressed.
2. Joystick Controller - The Joystick controls three functions:
drive, lift, and drive/lift speed. The drive or the lift function
switch must be selected prior to moving the machine with
the Joystick. The speed is controlled by the travel distance of
the Joystick.
3. Steer Control Switch - The thumb-operated steer switch on
top of the Joystick handle activates the steer wheels in the
direction it is moved (right or left).
3-6
4. Speed/Generator Switch - The three position speed/gener-
ator switch permits the operator to select either high range,
low range or the generator (if equipped).
NOTE: The machine cannot be lifted up from platform controls or
driven when the generator is selected.
4 wheel drive is operational in low drive only.
DO NOT USE HIGH ENGINE SPEED WHEN DRIVING IN CLOSE QUARTERS OR WHEN
DRIVING IN REVERSE.
NOTE: If machine is being operated in high range speed and the plat-
form is raised above 90 - 96 in (2.3-2.4 m), the engine speed
switch will cut out returning drive speed to low until the plat-
form is again lowered below the cut out level.
31215865