Chapter Two System Setup; Motherboard Bios Setup - Inspur Yingxin User Manual

Hide thumbs Also See for Yingxin:

Table of Contents

In this chapter, the jumper of motherboard and BIOS function setup of this server are

introduced. Only operator or administrator with qualification of system maintenance can

implement these operations described in this part.

BIOS is a basic input and output system. With some special setting programs, it can adjust

the system parameter and the hard disk parameter. As BIOS has great influence on the starting and

running of the system, setting parameters improperly may arise the conflict among hardware

resources, or affect the system's performance. Hence understanding the BIOS setup is significant

to the configuration of your server. If there is no special requirement, we suggest you use the

default value and not alter the parameters.

Notes:

1．Before the server BIOS setup is altered, please record the corresponding original setup.

Hence when there are operating problems in the system due to the alteration, the setup can be

reversed.

2．The factory default system setup is usually the optimized setup. Don't try to alter the

parameters before you understand their denotations.

3．The common setup is introduced in detail in this chapter. For items less used in the

application, this chapter only offers simple instruction or just omits the instruction.

4．The contents of the BIOS may differ due to the different configurations of products; no

detailed introduction will be provided here.

How to Enter the BIOS Setup

Power up and start the server. When the prompt of "Press DEL to run Setup. Press Tab to

display BIOS POST Message. Press Alt+F2 to run EzFlash" is displayed at the bottom of the

screen, press [DEL] and then the system enters BIOS setup.

If the system does not enter BIOS setup after previous steps, please press [Ctrl]-[Alt]-[Del] at

the same time to reset the system, and repeat operations above. (If the prompt displays to press

[DEL] again, please press it quickly.)

BIOS System Menu Introduction

Next the following main function menus of BIOS are introduced.

Menu Name

Green light on: network transmission rate is

1Gb/s

Chapter Two System Setup

Menu Function

Table of Contents