Inspur Yingxin User Manual
  1. Manuals
  2. Brands
  3. Inspur Manuals
  4. Server
  5. Yingxin
  6. User manual
Inspur Yingxin User Manual

Inspur Yingxin User Manual

Hide thumbs Also See for Yingxin:
Table of Contents

Advertisement

Quick Links

Download this manual
Dear users of Inspur Yingxin server:
Sincerely thank you for selection of Inspur Yingxin server！
This manual introduces the technical characteristics and the system installation and setup of
the server, and helps you to particularly understand and expediently use this server.
Please deliver the package of our product to the waste recycling station for recycling, in favor
of pollution prevention and humankind benefit.
This manual is the property of the Inspur Group Co., Ltd.
This User Manual is not to be copied by any group or person in any manner without the
consent of Inspur Group Co., Ltd. The Inspur Group Co., Ltd. reserves the right of revising this
manual momentarily.
Any alteration about the content of this manual will not be noticed.
Please contact Inspur, if you have any questions or advice about this manual.
"Inspur" and "Yingxin" are registered trademarks of Inspur Group Co., Ltd.
Other trademarks belong to other corresponding registered companies.
Inspur
October 2013

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Yingxin and is the answer not in the manual?

Questions and answers

Related Manuals for Inspur Yingxin

Summary of Contents for Inspur Yingxin

  • Page 1 This manual is the property of the Inspur Group Co., Ltd. This User Manual is not to be copied by any group or person in any manner without the consent of Inspur Group Co., Ltd. The Inspur Group Co., Ltd. reserves the right of revising this manual momentarily.
  • Page 2 Service Center. Don’t disassemble the server case or any hardware components in the case by yourself. 3. In Inspur Yingxin server, the MEMORY, CPU, CPU Fan and Fan are in given standard. Please don’t use them with the corresponding components of any other computers confusedly.

  • Page 3: Regarding The Manual

    Regarding the Manual ● Product Description In this chapter, the technical characteristics, appearance characteristics and I/O interface technical specifications of this server are introduced. ● System Setup In this chapter, the setup of jumper wire and the system BIOS of this server is introduced. ●...

  • Page 4: Safety Information

    Inspur; only maintenance technicians trained by Inspur have the right to disassemble the cover of the host, dismount and replace the internal components.
  • Page 5 1. In case of the following cases, please unplug the power line plug of products from the power socket and contact the customer service department of Inspur: - The power cables, extended cables or power plugs are damaged.
  • Page 6 - Close the cover of the host, re-connect the system to the power socket, and then start the equipment. - In case of operation failure or abnormal situation, please contact Inspur and get technical support. 3. Pay attention to the position of the system cables and power cables, wire them in places not to be stepped on or knocked down and ensure not to place other objectives on the cables.
  • Page 7 7. When dismounting the internal components with the approval of Inspur, please pay attention to the following matters: - Switch off the system power supply and disconnect the cables, including disconnecting any connection of the system.

  • Page 8: Table Of Contents

    Contents STATEMENT ............................II REGARDING THE MANUAL………………………………………………………………………III SAFETY INFORMATION........................IV CHAPTER ONE PRODUCT DESCRIPTION ..................1 1.1 Server Technical Specification .................... 1 1.2 Front Panel View ......................... 2 1.3 Back Panel Introduction ...................... 4 CHAPTER TWO SYSTEM SETUP..................... 6 2.1 Motherboard BIOS Setup....................6 2.2 Motherboard Jumper Settings ...................

  • Page 9: Chapter One Product Description

    Chapter One Product Description 1.1 Server Technical Specifications Processor Processor Type Intel Xeon E3-1200 serious CPU Processor Count Processor 32nm Technology Processor LGA1150 Sockets Interface Chipset Chipset Type Intel C222 chipset Memory Memory Type DDR3 1066MHz/1333MHz ECC Unbuffered memory DIMM Memory 2GB, 8GB Capacity per slot...

  • Page 10: Front Panel View

    Standard configuration supports 4 pieces of SATA hard disks or up to 8 pieces Number of SATA hard disks through expansion accessories External Storage Drive Inspur driver U Optional Inspur Driver U disk, used to load hard disk controller driver when disk installing the operating system manually CD-ROM Optional SATA standard CD-ROM...
  • Page 11 Front Panel View Number Name Function and Introduction Power button Server on/off button Reset button System reset button Power indicator Always on when server works Hard disk Display hard disk working condition, blinks when indicator hard disk is reading and writing Always on: network is connected Network card indicator light...

  • Page 12: Back Panel Introduction

    1.3 Back Panel Introduction 1.3.1 Back Panel View Back Panel View Function and Introduction Number Name Power interface Connect the host power line Power fan Power cooling fan I/O interface Input/output interface System cooling fan Chassis fan Expansion devices connecting PCI PCI and PCI-E expansion slot and PCI-E interfaces...
  • Page 13 1.3.2 I/O Interface I/O Interface View Number Name Function and specification PS/2 mouse & For connecting PS/2 mouse keyboard interface Rear USB 2.0 For connecting USB 2.0 interface devices interfaces 1, 2 Rear USB 3.0 For connecting USB 3.0 interface devices interfaces 1, 2 Serial interface For connecting serial interface devices...

  • Page 14: Chapter Two System Setup

    Green light on: network transmission rate is 1Gb/s Chapter Two System Setup In this chapter, the jumper of motherboard and BIOS function setup of this server are introduced. Only operator or administrator with qualification of system maintenance can implement these operations described in this part. 2.1 Motherboard BIOS Setup BIOS is a basic input and output system.
  • Page 15 Main Configuring the basic system settings, such as system time, system date, super user and user password setup; displaying version of BIOS, CPU, and memory information, etc. Event Logs Configuring system event log setup Advanced Configuring advanced characteristics of chipset Monitor Displaying system temperature, power supply state and fan setup...
  • Page 16 For saving CMOS settings and exiting For executing current command or entering the Enter submenu 1. Main menu Entering BIOS setup utility, you can see Main menu displayed firstly. Use the arrow key to select the option, and press [Enter] to select submenu. ●BIOS Information Display BIOS’s manufacturer information.
  • Page 17 ACPI Settings Trusted Computing WHEA Configuration CPU Configuration North Bridge South Bridge SATA Configuration Intel TXT(LT) Configuration USB Configuration Onboard Devices Configuration Serial Port Console Redirection ● CPU Configuration Select this item, and press [Enter] to enter the menu. All the items or submenus in this menu are used to check and set the related information and parameter about the CPU.
  • Page 18 This item only appears when SATA Mode option is set to [IDE Mode]. ● Systems Agent（SA）Configuration Press [Enter] to enter this item to set the configuration of system agent parameter. * VD-T This item is used to set whether to enable Intel virtualization technology, having [Disabled] and [Enabled] two options.
  • Page 19 This item is used to configure I/O port 60h/64h simulation support. In non-USB recognition operating system, this item must be enabled to fully support old-fashioned USB keyboard, having [Disabled] and [Enabled] two options. ●ACPI Press [Enter] to enter this item to set the configuration of ACPI. * Enable Hibernation This item is used to set whether to enable or disable hibernation function (OS/S4 in sleep state), having [Disabled] and [Enabled] two options.

  • Page 20: Motherboard Jumper Settings

    2.2 Motherboard Jumper Settings Open the Chassis Side Panel If the user need alter motherboard jumpers, please first obtain the authorization of Inspur. Then open the chassis upper panel according to the following steps: 1. Power off the system (disconnect AC power cable).
  • Page 21 2. Unscrew the 2 screws used for fixing the side panels in the back of the chassis. 3. Push the side panel to the back of the chassis and take down the side panel. Open the side panel of the chassis Introduction of Motherboard Jumper Function Motherboard common use jumper location picture Jumper na...

  • Page 22: Chapter Three Setup Of Sas Raid

    controller 2 display controller (default). Short-cutting pin2 and 3 to disable onboard display controller Short-cutting pin1 and 2 is normal state (default). CLRTC1 CMOS clearing jumper Short-cutting pin2 and 3 is CMOS clearing state Short-cutting pin1 and 2 to enable onboard Enable/disable onboard display display controller (default).

  • Page 23: Sata Hostraid Configuration

    For exiting menu or back to the previous menu from submenu 3.3 SATA HostRaid Configuration After entering the SATA HostRaid configuration interface, these information will pops out, including the menu list information, the information of the HDDs connected to the SATA controller (HDD port number, HDD model, HDD capacity and whether the HDD is part of the volume, etc), the existing RAID volume information (including volume ID number, name, RAID level, capacity, state and whether can boot information), as show in the below picture.
  • Page 24 RAID Level: please select RAID level; if no volume is created, there are five levels for choice, RAID0 (Stripe), RAID1 (Mirror), Recovery, RAID10 and RAID5 (Parity); please select the level according to actual needs. RAID0: it allows two or more than two hard disks to create this RAID volume. RAID1: it allows two hard disks to create this RAID volume.

  • Page 25: Chapter Four Operating System Installation

    During manual setup of the operating system, some operating systems may need the floppy driver or Inspur driver U disk to load the drive of hard disk controller. Refer to the readme.pdf file under the root directory in Inspur driver CD for the making method of the driver floppy disk.

  • Page 26: Manually Install Windows Server 2008 R2

    ● On making the drivers, if using USB floppy drivers please make the driver into the floppy disk; if using the Inspur driver U disk make the driver into the Inspur driver U disks; if using common driver U disk, when making driver, input the drive where the common U disk is and the directory where the driver locates, and make the driver into the common U disk 4.1.2 Installation Steps...
  • Page 27 (4) The driver of the hard disk controller is loaded completely If Inspur driver U disk or common U disk is used: (1) Make the driver of the hard disk controller into [3.5 floppy disk (A:)] partition of Inspur driver U disk or common U disk.
  • Page 28 3. Install Chipset patch (1) Insert Inspur driver CD into CD-ROM, click the blue dolphin icon under the installation or operation procedure item in the automatically playing interface popped out after the disk’s running, and input the navigation No.

  • Page 29: Manually Install Red Hat Enterprise Linux 6.2

    (9) Enter the interface of “Ready to Install the Program”, and click <Install> to continue; (10) The installation program starts to install; when the installation is completed, click <Finish> according to the prompt. 5. Install Video driver After the installation of network card driver, stay in the installation interface of driver CD and continue with the installation of video driver.
  • Page 30 Rescue installed system Boot from local driver Use up and down arrow keys to select the option, here the default is the first installation, select “Install or upgrade an existing system”, press <Enter> to continue the installation. 3.System prompts “Disc Found，To begin testing the media before installation press OK. Choose Skip to skip the media test and start the installation.”...
  • Page 31 Use Free Space Create Custom Layout This installation takes custom layout as an example, select “Create Custom layout”, click <Next> to continue the installation. 12. The installation program enters install hard disk interface. In the list of “Data Storage Devices (to be mounted only)”, system will display the detected storage devices. Please select the hard disk that needs to install system, add this hard disk to the list of “Install Target Devices”, select one hard disk as “Boot Loader”, and then click <Next>...
  • Page 32 After completing the operating system installation, system will load the onboard network card driver automatically. You can update network card driver manually using attached driver CD. 1. Insert Inspur driver CD into CD-ROM, click Terminal menu in Applications→System Tools, and input the following in the windows:...

  • Page 33: Chapter Five Common Problems And Trouble-Shooting

    #tar -zxvf igb-1.3.8.6.tar.gz #cd igb-1.3.8.6/src #make install #cd / #umount /mnt #reboot (Notes: “igb-1.3.8.6.tar.gz” is network card driver, and its version will be updated. When being installed, the actual version in the accompanying driver CD shall prevail.） 2. System will auto reboot, please take out the driver CD. 3.
  • Page 34 5. Find another monitor for test if possible. 6. If the machine is installed with components other than Inspur ones, please remove them first. 7. With the permission of Inspur technical support personnel, you may pull and plug RAM and clear CMOS for test.
  • Page 35 ● If you are using the system CD to boot and install the operating system directly, the hard disk drive is generally added through the floppy driver or Inspur driver U disk. When using USB floppy driver to add the drive, please set the BIOS first and close the onboard floppy driver controller.

  • Page 36: Machine Alarm

    3. After having collected the basic information, please feedback the detailed alarm information to Inspur technical support personnel in a timely manner. We will make further analysis and judgment and help you solve the problem as soon as possible.

  • Page 37: Technical Support Information

    4. For more notices of our products, please refer to the FAQ for server in the official website of Inspur: http://www.inspur.com/support/Channel_Home/support_sv.asp 5.5 Technical Support Information If you have any doubt or unsolved problems in using Inspur server, please take the following measures: 1. If you have doubt in product configuration and specification details, please contact your supplier.

Table of Contents