AT&T Syn248 SB35010 Installation And Configuration Manual page 21

Syn248 Installation and Configuration Guide
To attach the Desktop Stand for desktop installation:
1. Select a Deskset position. The desktop setup requires the Deskset Stand and provides
two positions, Option 1 at 45° and Option 2 at 60°, as shown in Figure 10. If you use
Option 2, rotate the Handset tab as explained in
and Deskset Option 2 installation:" on page
2. Place the Deskset on a flat surface with the power and network ports facing you, as
illustrated in Figure 12.
3. Place the stand, illustrated in Figure 11, on the base with the flexible tab side away
from you.
4. Insert the solid tabs of the stand into the Option 1 or Option 2 slots on the base that
are marked in red in Figure 12.
Installation
21.
Option 1 Option 2
Figure 10. Deskset Stand Options
Flexible Tabs
Figure 11. Deskset Stand Tabs
Flexible tabs
Solid tabs
Flexible tabs
Solid tabs
Figure 12. Deskset Stand Installation
20
Back to Contents
"To rotate the Handset tab for wall
Option 1
Option 2