Syn248 Installation and Configuration Guide
D
EVICE
This chapter shows you how to configure the Syn248 system using the device
configuration menus. Most of these functions are duplicated in the WebUI, but if you need
to assign static IP addresses, they must be set at each device. You can only directly reset
a device from the device, although some functions in the WebUI include device resets.
This chapter covers:
"SB35010 Gateway Features" on page 71
"Gateway Front Panel Interface" on page 73
"Resetting Devices" on page 77
"Deskset Admin Settings" on page 78.
Device Configuration
C
ONFIGURATION
70
Back to Contents
C
H A P T E R
3