AT&T Syn248 SB35010 Installation And Configuration Manual page 62

Syn248 Installation and Configuration Guide
To back up the System Settings:
1. In the navigation menu at left, click Device Management, then Back up/Restore,
then System Settings. The Back up/Restore System Settings page appears.
2. Click
Your web browser opens a window asking you if you would like to save the

backup file. Click
Save the file to a location on your computer so that you can restore your settings

later.
To restore the System Settings:
1. If practical, unplug the telephone lines from each Gateway while restoration is in
progress to ensure you do not receive any incoming calls.
If you have two Gateways, and you log into one of the Gateways using the Gateway's
IP address, you do not need to unplug all of the other outside lines from the other
Gateway; just the one that you are logged into.
2. In the navigation menu at left, click Device Management, then Back up/Restore,
then System Settings. The Back up/Restore System Settings page appears.
3. Enter the name for the restore file or click
Make sure you select the correct file to restore. The restore file name includes
"system" and the date and time.
4. Click
restarts. You are then logged out of the WebUI.
System Configuration
.
.
. The system settings are restored and the Gateway
61
Back to Contents
and select a system file.