Product Certifications - Emerson Rosemount 3051CF Series Quick Start Manual

Quick Start Guide
5

Product certifications

Rev 2.8
5.1 European directive information
A copy of the EU Declaration of Conformity can be found at the end of the
Quick Start Guide. The most recent revision of the EU Declaration of
Conformity can be found at Emerson.com/Rosemount.
5.2 Ordinary location certification
As standard, the transmitter has been examined and tested to determine
that the design meets the basic electrical, mechanical, and fire protection
requirements by a nationally recognized test laboratory (NRTL) as accredited
by the Federal Occupational Safety and Health Administration (OSHA).
5.3 North America
5.3.1 E5 USA Explosionproof (XP) and Dust-Ignitionproof (DIP)
Ranges 1-5 (HART)
Certificate FM16US0121
Standards FM Class 3600 – 2018, FM Class 3615 – 2018, FM Class 3616 -
Markings
Range 6 (HART/Fieldbus/PROFIBUSPROFIBUS
Certificate 1053834
Standards ANSI/ISA 12.27.01-2003, CSA Std. C22.2 No. 30 -M1986, CSA
Markings
5.3.2 I5 USA Intrinsic Safety (IS) and Nonincendive (NI)
Range 1-5 (HART)
Certificate FM16US0120X
30
2011, FM Class 3810 – 2005, ANSI/NEMA 250 – 2008
XP CL I, DIV 1, GP B, C, D; DIP CL II, DIV 1, GP E, F, G; CL III;
T5(-50 °C ≤ T ≤ +85 °C); Factory Sealed; Type 4X
a
Std. C22.2 No.142-M1987, CSA Std. C22.2 No. 213 - M1987
XP Class I, Division 1, Groups B, C and D, T5, (-50 °C ≤ T
°C) Suitable for Class I, Zone 1, Group IIB+H2, T5; DIP Class II
and Class III, Division 1, Groups E, F and G, T5, (-50 °C ≤ T
°C) ; Type 4X; Factory Sealed; Single Seal (See drawing
03031-1053)
January 2020
®
)
Emerson.com/Rosemount
≤ 85
a
≤ 85
a