Emerson Rosemount 3051CF Series Quick Start Manual page 32

Quick Start Guide
be taken into account during installation and use to prevent impact
and friction.
2. The Rosemount 3051 Transmitter with the transient terminal block
(Option code T1) will not pass the 500 Vrms dielectric strength test,
and this must be taken into account during installation.
Range 1-6 (HART/Fieldbus/PROFIBUS)
Certificate 1053834
Standards ANSI/ISA 12.27.01-2003, CSA Std. C22.2 No.142-M1987, CSA
Markings
5.3.4 C6 Canada Explosionproof, Dust-Ignitionproof, Intrinsic Safety and
Nonincendive
Certificate 1053834
Standards ANSI/ISA 12.27.01-2003, CSA Std. C22.2 No. 30 -M1986, CSA
Markings
5.3.5 E6 Canada Explosionproof, Dust-Ignitionproof and Division 2
Certificate 1053834
Standards ANSI/ISA 12.27.01-2003, CSA Std. C22.2 No. 30 -M1986, CSA
Markings
32
Std. C22.2. No.157-92
IS Class I, Division 1 Groups A, B, C, D, T4 (-60 °C ≤ T
when connected in accordance with Rosemount drawing
03031-1024, Suitable for Class I, Zone 0 Group IIC; Type 4X;
Factory Sealed; Single Seal (See drawing 03031-1053)
Std. C22.2 No.142-M1987, CSA Std. C22.2. No.157-92, CSA
Std. C22.2 No. 213 - M1987
Explosionproof for Class I, Division 1, Groups B, C and D;
Suitable for Class I, Zone 1, Group IIB+H2, T5 (–50 °C ≤ Ta ≤
+85 °C);
Dust-Ignitionproof Class II, III Division 1, Groups E, F, G; T5 (–
50 °C ≤ Ta ≤ +85 °C);
Intrinsically Safe Class I, Division 1, Groups A, B, C, D when
connected in accordance with Rosemount drawing
03031-1024, Temperature Code T4; Suitable for Class I, Zone
0;
Class I Division 2 Groups A, B, C, and D, T5; Suitable for Class I
Zone 2, Group IIC; Type 4X; Factory Sealed; Single Seal (See
drawing 03031-1053)
Std. C22.2 No.142-M1987, CSA Std. C22.2 No. 213 - M1987
Explosionproof Class I, Division 1, Groups B, C, and D; Suitable
for Class I, Zone 1, Group IIB+H2, T5;
January 2020
≤ +60 °C)
a
Emerson.com/Rosemount