Tandberg Data Magnum 448 Manual page 3

Glossary of Abbreviations
FH = Full Height (tape drive)
HH = Half Height
R I
EFERENCE LLUSTRATIONS
Figure 1 Internal library serial connectors
S C
ERIAL ABLE
Connect to tape
drive side plate
!
Be sure to use the serial cable that came with your replacement kit. The serial cables are
Important
specifically configured (at the factory) for use with the individual tape drives.
T D C
APE RIVE OVER
SCSI cover
plate
Half Height
SCSI
configuration
SCSI cover
plate
TD = Tape Drive
448 = Magnum 448 LTO Library
Serial cable (connectors may differ from what is shown)
P
LATES
Rev "A" = Revision A (power supply)
Rev "B" = Revision B (power supply)
Looking inside back of library
Top library serial connector (Drive 4)
Third library serial connector (Drive 3)
Second library serial connector (Drive 2)
Bottom library serial connector (Drive 1)
Full Height
Fibre Channel
configuration
See Figure 14 for the
Full Height SCSI
Tape Drive Cover Plate
Connect to library
3 16
OF