Christie Q Series Installation And Setup Manual page 17

Projector
Worktable
6. Using the two M4x10 screws, attach the mount bracket to the ultra short throw fixed lens and
torque to 0.98 Nm (10 kgf·cm).
Note the direction of the arrow on the lens mount bracket.
7. Remove the two adjusters from the projector.
8. Insert the two collars into the removable adjusters and mount the projector.
Collars
9. Using the hex key, loosen the screw until it stops.
Screw
Optional Lenses Q Series Installation and Setup Manual
020-102550-01 Rev. 1 (04-2017)
Copyright 2017 Christie Digital Systems USA Inc. All rights reserved.
©
Installing the ultra short throw fixed lens
Adjuster collar
Ultra short throw 0.38:1 fixed lens
M4x10 screws
Lens mount bracket
Ultra short throw 0.38:1 fixed lens
Adjuster
Adjuster
17