Christie Q Series Installation And Setup Manual page 7

c) Slide the lens into the projector.
To avoid any malfunctions, ensure the surface of the lens does not come in contact with
the projector.
groove
Lens cap (rear)
Lens cap (front)
d) Support the lens and move the lens lock lever upward until the lever clicks into the locked
position.
e) To prevent the lens from falling off, after attaching the lens, check that it is securely
mounted and that the lens does not move.
4. Re-install the upper and lower front covers.
Optional Lenses Q Series Installation and Setup Manual
020-102550-01 Rev. 1 (04-2017)
Copyright 2017 Christie Digital Systems USA Inc. All rights reserved.
©
Lens lock lever
Installing the zoom lenses for Q Series
7