Table of Contents
Advertisement
●
Rear
10. Power connector
11. Input signal connector Left: DisplayPort connector / Center: DVI-D connector / Right: D-Sub mini15-pin
12. USB port (UP)
13. Security lock slot
*2
14. Stand
15. USB port (DOWN)
16. Protective earth
terminal
17. Cable holder
*2 An optional arm (or an optional stand) can be attached by removing the stand (see
Arm" (page
35)).
1-3. EIZO LCD Utility Disk
An "EIZO LCD Utility Disk" (CD-ROM) is supplied with this product. The following table shows the disk
contents and the overview of the software programs.
●
Disk contents and software overview
The disk includes software programs for adjustment, and User's Manual. Refer to Readme.txt file on
the disk for software startup procedures or file access procedures.
Item
Screen adjustment pattern files
ScreenManager Pro for LCD
(DDC/CI)
EIZO ScreenSlicer
User's Manual of this monitor (PDF file)
Readme.txt file
●
To use "ScreenManager Pro for LCD (DDC/CI) / EIZO ScreenSlicer"
For the installation and use of "ScreenManager Pro for LCD (DDC/CI) / EIZO SceenSlicer", refer to
the respective User's Manual on the disk.
13
10
Connects the power cord.
connector
Connects the USB cable for using the USB Hub function
Complies with Kensington's MicroSaver security system.
Adjusts the height and angle (tilt and swivel) of the monitor.
Connects a peripheral USB device.
This terminal is used to connect the earth wire. Use an earth wire with minimum
conductor size of 0.75 mm, and with a terminal of suitable material.
Covers the monitor cables.
Used when adjusting the image of analog
signal input manually.
Software for adjusting the screen using the
mouse and keyboard.
Software that divides a screen and lays out
multiple windows efficiently.
16
14
11
12
Overview
15
17
(page
37).
"6-1. Attaching the Optional
Windows
Macintosh
√
√
√
√
√
Chapter 1 Introduction
√
-
-
√
√
9
Advertisement
Table of Contents
