How To Use Usb Hub Function - Eizo RadiForce GX560 Installation Manual

7-2. How to Use USB Hub Function

This monitor is equipped with a USB hub. Connected to a PC compatible with USB or another monitor
with a USB hub, this monitor functions as a USB hub allowing connection to peripheral USB devices.
Connection procedure
1. Connect the USB cable between the monitor's USB upstream port and the USB downstream port
of the PC (or another monitor that has a USB hub).
2. Connect the peripheral USB device to the USB downstream port of the monitor.
Attention
• When the main power switch is Off, device connected to the USB port will not operate.
• Connect a PC with RadiCS / RadiCS LE installed to
Note
• A cap is attached to
• is enabled in the default settings. When connecting two PCs and switching PCs that use USB devices, see
"5-3. Switching PCs Used to Operate USB Devices" (page
30
Chapter 7 Reference
USB
downstream port
prior to shipment. Remove the cap when using
USB
upstream port
to perform monitor quality control.
.
18).