Hitachi Hidic EH-150 Applications Manual page 85

Preliminary Rev.03
Close Mode Control Register (CMCR)
Bit
+9
This is the register which chooses the handling when this module receives Close request from other station.
Bit 15-6: Reserved.
These bits are reserved bits. Please set "0" always.
Bit 13-8: Close mode bit (CM[6:1])
To specify the close mode for each connection.
Bit5-0: CM[6:1]
0
1
The contents of this manual might be changed without notice.
15 14 13 12 11
- - - - -
The mode where this module Close connection as soon as this module
receives close request from other station.
The mode where this module waits for close request from user ladder
diagram when this module receives close request.
10 9 8 7 6
- - - - -
Description
8-16
Chapter 8 Register Structure
5 4 3 2 1
CM6 CM5 CM4 CM3 CM2 CM1
(Initial set)
0