Hitachi Hidic EH-150 Applications Manual page 23

Preliminary Rev.03
No Name
EH-ETH Information
1) IP address
2) Subnet mask
3) Default Gateway
Routing Information [1:6]
4-1) Network address
5-1) Subnet mask
6-1) Gateway
Other station for Diagnosis
7) IP address
8) Port No.
9) Set Button
10) Clear Button
The check of the set value will be started after clicking the "Set" button on the frame. If the value are correct,
these values are saved into set up file and the frame changes to "IP address display frame". If there is a error in
the value, set up file is not changed. Please correct the value and set again.
To cancel the input value, please push the "Return" button of Web browser. The frame will return to the "IP
address display frame".
The contents of this manual might be changed without notice.
Chapter 5 Configuration and procedure for starting communication
1)
2)
3)
4-1)
5-1)
6-1)
4-2)
5-2)
6-2)
4-3)
5-3)
6-3)
4-4)
5-4)
6-4)
Figure 5.7 IP address setting frame
Table 5.7 The list of items of IP address operation frame
To set the IP address of EH-ETH
To set the Sub Net Mask of EH-ETH
To set the Gate Way address of EH-ETH
To set the network address of the destination of routing.
To set the Sub Net Mask of the destination of routing.
To set the Gate Way address of the destination of routing Except 0.0.0.0 and 255.255.255.255
To set the destination IP address of EH-ETH's testing.
To set the destination Port number of EH-ETH's testing. Between 1 and 65535
To check the items to be set and to save the values into
set up file.
To clear the items for setting.
9) 10)
Description
5-7
4-5)
5-5)
6-5)
4-6)
5-6)
6-6)
7)
8)
Range for setting
Except 0.0.0.0 and 255.255.255.255
Between 255.0.0.0 and 255.255.255.248
Except 0.0.0.0 and 255.255.255.255
Except 0.0.0.0 and 255.255.255.255
Between 255.0.0.0 and 255.255.255.255
Between 0.0.0.0 and 255.255.255.255