Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Hitachi Manuals
  4. Controller
  5. HIDIC EH-150
  6. Applications manual

Hitachi Hidic EH-150 Applications Manual page 36

Ethernet module
Hide thumbs Also See for Hidic EH-150:

Advertisement

Preliminary Rev.03
The check of the set value will be started after clicking the "Set" button (A) on the window. If the value are
correct, these values are saved into setup file and the window changes to "Automatically Sending and
Receiving connection display window". If there is an error in the value, the error code is displayed onto the
error window. Please correct the value and set again according to the error information
Table 5.5.3 The list of items of Automatically Sending and Receiving connection configuration
No.
Name
Own Station
1)
Usage
To specify the usage of connection. It is possible to set Send(for sending) or
Receive(for receiving). It is possible to specify both. If the Send is not
specified (8) to (10) are not valid.
2)
Protocol
To specify the protocol of self station.
3)
Open Type
To specify the open type of self station. When Active is specified, open
request is sent activity. When Passive is specified, open request from the
target station is waited.
4)
Port No.
To specify the logical port number of self station.
Other Station
5)
Other station IP
To set the decision of specifying the target IP address or not. When Specified
address
is specified, the communication is done only with specified target. When
Optional is specified, the target station is not specified. If the Optional is
specified (6) and (7) is not valid.
6)
IP address
To set IP address of target station.
7)
Port No.
To set logical port number of target station.
8)
Type
To specify the sending type of connection. When Event Send is specified, (9)
and (10) are not valid. (Please specify 0 or nothing for these. It will error
when except 0 specified.)
9)
Cyclic Time
To specify the time interval of Cyclic Send.
10) Unit
This is the unit for Cyclic Time.
There are some limitation in the combination between parameters (1)(2)(3)(5) in table 5.5.3. These are
described in table 5.5.4.
The possible combination to set
Items to
Own Station
set
Other Station
(*1) A: Active Open, P: Passive Open
(*2) S: Specified, O: Optional,
(*3) Combination No.9, this means broadcast communication. In this case the same data can be sent to the
several target stations on the condition of waiting for receiving on the same network with same logical
port number. Using this combination, broadcast sending can be programmed by user program.
The contents of this manual might be changed without notice.
Chapter 5 Configuration and procedure for starting communication
Table 5.5.4 The possible combination to set
1
(2)Protocol
(1)Usage
(3)Open Type(*1)
A
(5)Other Station(*2)
S
Description
2
3
4
5
6
TCP/IP
Send
Receive
P
P
A
P
P
S
O
S
S
O
5-20
Range for setting
Send, Receive
TCP/IP, UDP/IP
Active, Passive
1 to 65535
Optional, Specified
0.0.0.0 to
255.255.255.255
1 to 65535
Event Send, Cyclic
Send
0 to 1073741 (sec)
0 to 17895 (min)
0 to 298 (hour)
0 to 12 (day)
s, min, h, d
7
8
9
10
11
UDP/IP
Send
Receive
A
P
A
A
P
S
S
O
S
S
12
P
O

Advertisement

loading

Related Manuals for Hitachi Hidic EH-150

Related Products for Hitachi Hidic EH-150

This manual is also suitable for:

Eh-eth