Hitachi Hidic EH-150 Applications Manual page 12

Preliminary Rev.03
Chapter 4
Name and function of each part
5) Rock button
No. Name
1) LED cover
2) Dip switch
3) Rest switch
4) Connector for Ethernet
connection
5) Rock button
Contents of this manual may be changed without any
System equipment
1) LED cover
3) Rest switch
2) Dip switch
4) Connector for
Ethernet connection
Functions
LED cover for conditions and status monitor
Refer to "4.1 LED Indication" regarding detailed
information.
For setting operation mode and its IP address.
Initializing EH-ETH for module error etc.
RJ45 type connector
This button is used when removing the module from the
base unit. After it is installed in the base unit, the fixation
is reinforced using screws. In this case use M4 x 10
screws.
Type
Weight
Dimensions
(mm)
4-1
Chapter.4 System equipment
EH-ETH
0.15 kg
Remarks