Table of Contents
Advertisement
1.
Detach the HDD bracket from 2nd stack extension kit, then fix the 2.5" HDD/
SSD to the HDD bracket with the 4 x M3x4L screws from the accessory bag of
iDoor extension kit
2.
Fix the HDD bracket back onto the extension kit with the provided screws from
step 1.
3.
Extension Kit installation:
(1) Plug in SATA cable onto the board of UNO-137 and connect with SSD/HDD.
(2) Fix extension kit onto UNO-137 with 5 x M3x4L screws from its accessory
bag
UNO-137 User Manual
32
Advertisement
Table of Contents
