EPL-N2000 Service Manual
3.2.11 Paper Takeup Roller Unit Removal
1.
Remove the outer covers. (Refer to Section 3.2.1.)
2.
Remove the Fusing Unit. (Refer to Section 3.2.2 .)
3.
Remove the Transfer Unit. (Refer to Section 3.2.6.)
4.
Remove the High Voltage Supply Board.(Refer to Section 3.2.7.)
5.
Remove the Paper Empty Sensor Assembly (Refer to Section 3.2.9.)
6.
Remove 1 CCB screw (3X8) securing the Paper Lifting Plate.
7.
Remove 1 CCS screw (3X8) securing the Paper Takeup Roller Unit
8.
Remove the Paper Lifting Plate.
9.
Remove the Paper Takeup Roller Unit.
There is a spring under the paper lifting plate. Make sure that the spring won't catch the
connector when taking out the paper lifting plate.
Rev. A
Figure 3-20. Paper Lifting Plate Removal
CAUTION
Disassembly and Assembly
3-21