Epson EPL-N2000 Service Manual page 56

Product Description
Status
An IC card that has been inserted will not work with this printer.
On Line
LED
Continue
Form Feed
1.
2.
Measure
Status LocalTalk/Serial Module installed is not available.
On Line
LED
Continue
Form Feed
Measure
Turn off the printer and remove the LocalTlk/Serial module.
This error can be caused by any of 3 situations described below:
1.
Status
2.
3.
On Line
LED
Continue
Form Feed
1.
2.
Measure
3.
1-44
Table 1-21. Error Messages (Continued)
Error Messages and Descriptions
Illegal Card
OFF
OFF
Keeps the same status as before.
Turn the printer off and remove the card. Then turn the printer back on.
Remove the IC card with the printer on to make the Continue LED flash.
Then press the Continue button while the Continue LED is flashing.
The printer automatically starts a warm boot.
Illegal I/F Module
OFF
OFF
Keeps the same status as before.
Write Error Card
No data can be written onto the card.
Writing is not completed properly.
The card is not inserted.
OFF
OFF
Keeps the same status as before.
Turn the printer off and remove the card. Then turn the printer back on.
Remove the IC card with the printer on to make the Continue LED flash.
Then press the Continue button while the Continue LED is flashing. The
printer automatically returns to normal status.
Perform a Warm boot.
EPL-N2000 Service Manual
Rev. A