Transfer Unit Removal - Epson EPL-N2000 Service Manual

Disassembly and Assembly

3.2.6 Transfer Unit Removal

1. Remove the outer covers. (Refer to Section 3.2.1.)
2. Remove the Fusing unit. (Refer to Section 3.2.2.)
3. Remove the C207 MAIN Board. (Refer to Section 3.2.4.)
4. Remove the rear panel. (Refer to Section 3.2.5.)
5. Remove 1 CCB screw (3X8) securing the transfer unit.
6. Remove the Transfer Unit by pushing aside the left frame in the direction indicated by the
arrow.
Don't touch the surface of the Transfer Roller with your bare hands.
When assembling the transfer Unit, ensure that the pins on the Transfer Unit fit into the holes in
the Drive Unit.
3-14
Figure 3-11. Transfer Unit Removal
CAUTION
Assembly Note
EPL-N2000 Service Manual
Rev. A