EPL-N2000 Service Manual
3.2.5 Rear Panel Removal
1.
Remove the outer covers. (Refer to Section 3.2.1.)
2.
Remove the C207 MAIN Board. (Refer to Section 3.2.4 .)
3.
Remove the 6 CCS screws (3X6) securing the rear panel.
4.
Lift up the Rear Panel to release 2 hooks, then remove the panel. Be sure to disconnect the fan
connector from the High Voltage Supply (PWB-F) Board Unit.
Rev. A
3-10. Rear Panel Removal
Disassembly and Assembly
3-13