Blackmagicdesign Videohub Installation And Operation Manual page 924

request all ports status in salvo
@ V?0
Each queued routing change in the salvo is reported as a
clear salvo
@ B:C
clear salvo
@ B:R
Any queued changes are discarded and the salvo is reset.
execute salvo
@ B:E
Any queued changes are executed and each routing change will be returned as an
notification.
Saving and Loading Labels with Telnet in Mac OS
Normally you would use Blackmagic Videohub Setup to save and load labels between different
Videohub routers and to backup your videohub settings. However, if for any reason you wish to
use the Terminal, the instructions below let you save and load router label configurations via
the Terminal.
Saving Labels
1 Open the Terminal application which is located within the Applications > Utilities folder.
2 Type in "telnet" and a space followed by the IP of your Videohub, then another
space and "9990", which is the default port number. For example type: telnet
192.168.25.253 9990. The Protocol Preamble screen will appear.
notification.
V:
Developer Information
S:
924