Blackmagicdesign Videohub Installation And Operation Manual page 55

Using Pushbuttons
Adding Select the Settings button and then select "Edit Buttons". Click on the
Pushbuttons Add button and choose whether to add a source or destination pushbutton.
The Set Button window appears and allows you to set the SDI source or
destination, RS-422 deck control and the icon for the pushbutton. In most
cases, deck control is grouped with the associated SDI connections, e.g.,
SDI Input 1 would be associated with the corresponding Remote 1.
Editing Select "Edit Buttons" and click the pushbutton you wish to edit. Click on the
Pushbuttons Edit button and modify the source or destination, deck control settings and the
icon as required.
Set Button The Set Button window allows icon selection, source or destination selection
and deck control configuration.
Moving Select the Settings button and then select "Edit Buttons". Click and drag the
Pushbuttons pushbutton to a new position.
Viewing and Switching Routes
Viewing Routes In order to see which video source has been routed to a video destination, such
as a monitor, press the button in the destinations panel to make the button
illuminate. The associated video source button will illuminate in the sources
panel, making it immediately obvious which source is connected to the monitor.
Reveal Source If you select a destination but the source is currently positioned offscreen,
clicking the Reveal Source button will scroll the Sources area to display the
source pushbutton.
Switching Routes Select the destination icon followed by the source icon.
Blackmagic Videohub Software 55