Blackmagicdesign Videohub Installation And Operation Manual page 65

Blackmagic Videohub Hardware Panel Setup network settings.
If you are setting up hardware panel control for an IP Videohub, enter the host computer's
IP address in the 'remote Videohub IP' setting field. The Videohub server shares the same
IP address with the host computer.
Add Videohub Control
If you already know the IP address of a Videohub control panel but it hasn't automatically
appeared in the Videohub Control Panels pane, you can add the unit manually.
1 Press the + (add device) button at the bottom of the Videohub Control Panels pane.
2 Type in the IP address of the Videohub Control Panel and press OK.
3 The Videohub Control Panel will appear in the list with any other devices that are
connected to the Videohub.
If the Blackmagic Videohub Hardware Panel Setup does not find a Videohub control panel at
the specified address, you can use the Utility to manually add a Videohub control panel when
connected via Ethernet or USB.
You can manually add a Videohub control panel, by
IP address, to the list of Videohub Control Panels.
Load/Save Settings
You can apply settings from an already configured Videohub control panel to other units.
Once you have set up your Videohub Control Panel's settings, choose File>Save Settings.
This is useful if you want to set up several units the same way, or keep a back up of
your settings.
After loading pre-configured settings on another control panel, you only need to update
network settings, including the control panel name.
Blackmagic Videohub Software 65