Using Modbus Tcp Command To Configure The Ikan Display - ICP DAS USA iKAN Series User Manual

3.2.2.3. Using Modbus TCP Command to configure the iKAN display

Before using the Modbus TCP Command tool, the iKAN display must be set to Modbus
configuration mode. For more information about how to set the iKAN display to Modbus
Configuration Mode, refer to Appendix "A.1. How to set the iKAN display to Modbus Configuration
Mode".
1. Select the Modbus TCP Master option from the Tools menu
2. Enter the IP address and the Port number in the respective text fields and then click the Connect
button
iKAN Series Display User Manual v 1.0.1 Page: 62