Advertisement
V I . C A R E A N D M A I N T E N A N C E
CARE AND MAINTENANCE
Your lift system requires a minimal amount of care
and maintenance. If you do not feel confident in your
ability to perform the maintenance listed below, you
may schedule inspection and maintenance at your
authorized Harmar Dealer. The following areas require
periodic inspection and/or care and maintenance.
Daily Maintenance Schedule
This lift system may come equipped with any of
the securement devices listed below. Inspect these
devices for loose or damaged parts on a daily basis.
Have your authorized Harmar Dealer repair or replace
any problem parts before using the lift system.
■ Retractable tie-down straps
■ Scooter lock-down arm
■ Power chair hold-down bar
90-Day Maintenance Schedule
■ Clean and lubricate the T-bar inner telescoping
tube. Use only all-weather lithium grease. See
figure 24.
■ Lubricate all pivot points on the lift. Use only all-
weather lithium grease.
■ Inspect and clean the power-supply connections
as necessary.
■ Inspect all hardware and tighten or replace as
necessary.
■ Visually inspect lift system for loose or damaged
parts. Have your authorized Harmar Dealer repair
or replace any problem parts before using the lift
system.
Five-Year Maintenance Schedule
Inspect the "Spring-activated Mechanical Switch" and
lubricate or adjust spring tension as necessary. See
figure 25.
22
Figure 24. Lift Frame Maintenance
Figure 25. Spring-activated Mechanical Switch
www.harmar.com
T-BAR INNER
TELESCOPING TUBE
Outlander Series
Advertisement
