Table of Contents
Advertisement
HIGHLANDER 400-X: SECTION 4
CARE
SECTION 4
CARE
To maximize longevity and appearance of your lift,
Harmar recommends the following procedures:
•
Keep the VPL platform free of debris. Sweeping
to clear these areas regularly to prevent debris
accumulation is required. Wiping with a damp
cloth should be enough for additional surface
cleaning. If needed, a soft brush with mild soap
and water can be used on the platform and
guard ramp surfaces
•
You may choose to clean your VPL with soap
and water. Turn off VPL and disconnect all
power before cleaning. Be sure to rinse all soap
from VPL and let the VPL dry before using.
•
Keep door hinge hardware lubricated. Once a
year use lubricant on the hinges.
•
On an outdoor VPL, if the lift will not be
used for long periods of time, covering the
platform with a tarp and disabling the power is
recommended.
•
Fully disconnect the lift from all power if not
using for 2 months or more. Please consult your
dealer for proper disconnect procedures.
•
Yearly wax (car wax) is an excellent means to
protect an outdoor VPL from weather.
VPL400-X:
Owner's Manual
12
05MAY23 | 610-00103 A
Advertisement
Table of Contents
