Advertisement
Figure 5. Hold-down Bar Installation
Steps for retractable tie-down strap installation:
1. Remove mounting hardware from strap.
2. Align the meeting position on strap to the desired mounting point hole on the full platform. See
figure 6.
3. Install the hardware. See figure 6.
4. Repeat process for the second and third straps.
To install the lift system:
1. Remove the preassembled mounting hardware from the hitch tube.
2. Ensure that the hitch tube is properly oriented as shown in figure 7, and mount the hitch tube to
the lift frame using the previously removed mounting hardware. Install the hardware in the direction
indicated in figure 7.
3. Slide the hitch tube into the vehicle hitch receiver, aligning the mounting hole closest to the lift with
the mounting hole in the hitch receiver. See figure 7.
WARNING! Lift system components are heavy. Ask for assistance if necessary when attaching the lift frame to
the hitch receiver. Use proper lifting techniques and avoid lifting beyond your capacity.
WARNING! Avoid pinch points! Do not hold the lift frame by the pivot points when mounting the lift frame to
the hitch receiver.
Outlander Series
I I I . I N S TA L L AT I O N
Figure 6. Retractable Tie-down Strap Installation
www.harmar.com
11
Advertisement
