Advertisement
V I . C A R E A N D M A I N T E N A N C E
General Cleaning Guidelines
The lift system can be hand washed along with the vehicle with soap and water. However, automatic
drive-through car washes should be avoided as they may interfere with and cause damage to the lift.
Wiring Harness
The wiring harness should be checked periodically for corrosion and/or decay. Contact your authorized
Harmar Dealer if the wiring harness needs to be replaced.
Lift Platform/Metal Components
■ Check the lift platform for wear or damage. Contact your authorized Harmar Dealer for repair or
replacement.
■ The lift platform surface may become slippery if exposed to moisture (ice, snow, rain, mist/spray
conditions, etc.). Use caution when loading/unloading a mobility device in these conditions and
wipe off any excess moisture from the lift platform.
■ Regularly inspect the metal lift components for scratches. Treat any problem areas with a rust
inhibitor or metal sealant.
If your lift system is exhibiting wear that you feel is questionable in any way, contact your authorized
Harmar Dealer immediately. Do not attempt to repair, adjust, or modify the manufacturer settings and
materials.
Lift Removal
■ Raise platform to stowed position.
■ Disconnect power source.
■ Lubricate hitch mount bolt with WD-40® prior to removal.
Outlander Series
www.harmar.com
23
Advertisement
