Pinnacle Stair Lift Controls • The red “ON/OFF” switch is located on top of the chassis. This switch is normally left in the “ON” position (I). This switch can be turned “OFF” if you do not expect to use the lift for an extended period of time. Ensure that the lift is in the charging position within 3' of the top or bottom of the staircase.
Pinnacle Stair Lift Maintenance The LED indicator light will turn red if there is a service issue. Turn the “ON/OFF” switch to the “OFF” position (O) and then back to the “ON” position (I). The lights should sequence red-amber-green. If the light does not return to green, please call your service representative.
• Fire, flood, acts of God Harmar supplied/approved charger. • Shipping damage • Pinnacle SL600’s installed outdoors not • Parts used that are not approved by Harmar covered- not approved for outdoor use Mobility, LLC. • Damage resulting from improper installation •...
Need help?
Do you have a question about the pinnacle SL600 and is the answer not in the manual?
Questions and answers