Manitou MT732ST38 Operating And Safety Instructions Manual page 88

10 - ATTACHMENT HYDRAULIC LOCKING
Enables the attachment to be locked onto the carriage and a hydraulic attachment to
be used by the same hydraulic circuit.
After locking the attachment, return switch 2 to position A (indicator lamp off) to prevent accidental release of the
ATTACHMENT LOCKING CONTROL
- Set valve 1 to position A and place switch 2 in position B (indicator lamp on).
- Push button 3 forward to lock the attachment and backward to release it.
HYDRAULIC ATTACHMENT CONTROL
- Set valve 1 to position B and press switch 2 in position B (indicator lamp on).
- Operate button 3 forward or backward.
11 - HEAD TELESCOPE ELECTROVALVE + HYDRAULIC ATTACHMENT LOCKING
The addition of these two options on the attachment line allows two hydraulic functions
to be used and locks the attachment onto the carriage.
For ease of connection of the quick-release couplers, decompress the hydraulic circuit by pressing button 1 on the
After locking the attachment, return valve 4 to position B to prevent accidental release of the attachment.
ATTACHMENT LINE L1 CONTROL
- Set switch 2 to position A (indicator lamp off ).
- Operate button 3 forward or backward.
ATTACHMENT LINE L2 CONTROL + HYDRAULIC ATTACHMENT LOCKING
LOCKING AN ATTACHMENT
- Set valve 4 to position A.
- Set switch 2 to position B (indicator lamp on).
- Hold down button 5 and push button 3 forward to lock the attachment and
backward to release it.
HYDRAULIC ATTACHMENT
- Set switch 2 to position B (indicator lamp on).
- Hold down button 5 and operate button 3
forwards or backwards.
IMPORTANT
attachment.
3
IMPORTANT
electrovalve.
3
2 - 57
4
5
A
1
B
2
A
B
A
B
L1
L1
L2
L2
1
A
2
B