Manitou MT732ST38 Operating And Safety Instructions Manual page 87

8 - BOOM ELECTRICAL PREDISPOSITION
Enables an electrical function to be used at the telescope head.
BOOM ELECTRIC FUNCTION CONTROL
- Set switch 1 to position B (indicator lamp on).
- Hold down button 2 and operate button 3 forwards or backwards.
NOTE: Setting switch 1 to position A (indicator lamp off ) controls the hydraulic
attachment line (see: 2 - DESCRIPTION: 20 - HYDRAULIC AND TRANSMISSION
CUT-OFF CONTROLS).
9 - HEAD TELESCOPE ELECTROVALVE
Enables use of two hydraulic functions on the attachment circuit.
For ease of connection of the quick-release couplers, decompress the hydraulic circuit by pressing button 1 on the
ATTACHMENT LINE L1 CONTROL
- Set switch 2 to position A (indicator lamp off ).
- Operate button 3 forward or backward.
ATTACHMENT LINE L2 CONTROL
- Set switch 2 to position B (indicator lamp on).
- Hold down button 4 and operate button 3 forwards or backwards.
IMPORTANT
electrovalve.
2 - 56
A
1
B
2
3
L1
L2
L1
L2
1
A
2
B
4
3