Manitou MT732ST38 Operating And Safety Instructions Manual page 77

19 - HYDRAULIC CONTROLS
Do not attempt to alter the hydraulic system pressure. In the event of malfunction, contact your dealer. ANY ALTERATION MAY RENDER THE WARRANTY NULL AND VOID.
Operate the hydraulic controls gently and smoothly to avoid accidents caused by jerking of the lift truck.
NOTE: If necessary, operate the steering to reset the hydraulic control steering accumulator.
NOTE: When driving on the road, it is highly recommended (mandatory in Germany) that you cut-off all the hydraulic
movements (see: 2 - DESCRIPTION: 6 - SWITCHES).
• A - Lifting and tilting control lever.
• B - Telescoping control button.
• C - Attachment control button.
• D - Head telescope electrovalve OPTION control button .
LIFTING THE LOAD
- The lever A backwards when lifting.
- The lever A forwards when lowering.
TILT OF CARRIAGE
- The lever A to the left for reverse tilt.
- The lever A to the right for forward tilt.
TELESCOPING
- Button B forwards for extending.
- Button B backwards for retracting.
ATTACHMENT
- Button C forwards or backwards.
BOOM ELECTRICAL PREDISPOSITION OPTION
HEAD TELESCOPE ELECTROVALVE OPTION
- Button D (see: 2 - DESCRIPTION: DESCRIPTION AND USE OF OPTIONS).
20 - FUNCTION FILES
These files contain the description of the hydraulic controls and the load charts for the
attachments used on the lift truck.
21 - LEVEL INDICATOR
Enables the operator to check that the lift truck is in the horizontal position.
22 - HEATER CONTROL
A - FAN CONTROL
This 3-speed control allows the air to be ventilated through the air vents.
B - TEMPERATURE CONTROL
Adjusts the temperature inside the cab.
• B1 - The fan pumps in the air at ambient temperature.
• B2 - The fan pumps in warm air.
The intermediate positions allow the temperature to be adjusted.
IMPORTANT
2 - 46
B
D
C
A
22
23
B2 B1
A
B