C - Modification Of The Lift Truck; D - French Road Traffic Rules; E - Lift Truck Cab Protection; The Instructions - Manitou MT732ST38 Operating And Safety Instructions Manual

• Adapt the seat adjustment to the operator's weight (according to lift truck model) and maintain it in good condition,
as well as the cab suspension. Inflate the tires in accordance with recommendations.
• Ensure that the operators adapt their operating speed to suit the conditions on site.
• As far as possible, arrange the site in such a way as to provide a flat running surface and remove obstacles and harmful
potholes.

C - MODIFICATION OF THE LIFT TRUCK

- For your safety and that of others, you must not change the structure and settings of the various components used in your
lift truck (hydraulic pressure, calibrating limiters, engine speed, addition of extra equipment, addition of counterweight,
unapproved attachments, alarm systems, etc.) yourself. In this event, the manufacturer cannot be held responsible.

D - FRENCH ROAD TRAFFIC RULES

(or see current legislation in other countries)
- Only one certificate of conformity is issued. It must be kept in a safe place.
- The driving of non EC type-approved tractors on the public highway is subject to the provisions of the highway code
relating to special machines, defined in article R311-1 of the highway code, in category B of the Equipment Order of
20 November 1969 that determines the procedures applicable to special machines. The lift truck must be fitted with a
licence plate.
- The driving of EC type-approved tractors on the public highway is subject to the provisions of the highway code regarding
agricultural tractors, defined in article R311-1 of the highway code. The lift truck must be registered.
SPECIAL INSTRUCTION APPLYING TO "EC TRACTOR" TYPE-APPROVED LIFT TRUCKS
- All EC tractor type-approved lift trucks are supplied with an "EC tractor" certificate complying with directive 2003/37/EC, to be retained by the owner, and a page of
administrative details together with a CNIT number (national type approval code) for registration at the prefecture.
- The lift truck owner is responsible for carrying out the necessary procedures for obtaining the vehicle registration document within the time limit defined by the regulations.
- The operator must hold an HGV licence, unless granted an exemption.
- The lift truck must be driven on the public highway in accordance with the instructions given in the manual supplied with the lift truck (Gross weight, Gross combination
weight, towing load, axle loads, maximum speeds, etc. according to type/version). The operator must be in possession of the lift truck' s registration document.
When towing a trailer or agricultural equipment, the travelling speed of the lift truck is limited to 25 km/h.

E - LIFT TRUCK CAB PROTECTION

- All lift trucks comply with the requirements of ISO 3471 (wheel loader code) regarding cab rollover protection (ROPS)
and ISO 3449 (Level II) regarding the protection of the cab against falling objects (FOPS).
- "EC TRACTOR" type-approved lift trucks comply, in addition, with Directive 79/622/EC (OECD Code 4) regarding cab
rollover protection (ROPS).
Structural damage or overturning, a modification, changes or a poorly executed repair can reduce the protective efficiency of the cab, cancelling its compliance.

THE INSTRUCTIONS

- The operator's manual must always be in good condition and kept in the place provided on the lift truck and in the
language used by the operator.
- The operator's manual and any plates or stickers which are no longer legible or are damaged, must be replaced immediately.

THE MAINTENANCE

- Maintenance or repairs other than those detailed in part: 3 - MAINTENANCE must be carried out by qualified personnel
(consult your dealer) and under the necessary safety conditions to maintain the health of the operator and any third party.
The frequency of this inspection is defined by current legislation in the country in which the lift truck is used.
- Example for France "The manager in charge of the establishment using a lift truck must open and maintain a maintenance
log for each machine (order of 2 March 2004) and undergo a general periodic inspection every 6 months (order of 1
March 2004)".
In this case, a "25" disc must be affixed to the rear of the convoy.
Do not perform welding or drilling on the cab structure.
Consult your dealer to determine the limits of this structure without cancelling its compliance.
Your lift truck must be inspected periodically to ensure that it remains in compliance.
IMPORTANT
IMPORTANT
IMPORTANT
1 - 7