Installing The Elevator Restriction Unit; Mount The Elevator Restriction Unit - Mircom TX3 Series Installation Manual

2
Mircom's Elevator Restriction Units are used with the TX3 card access system to
restrict access to elevator floors based on access level.
This chapter describes how to
•
•
•
•
•
•
•
•
2.1

Mount the Elevator Restriction Unit

The Elevator Restriction Unit (ERU) contains the elevator access equipment.
Mount the ERU in the building's elevator room.
Elevator Restriction System Installation and Operation Manual
16
LT-9940 Copyright 2018
Installing the Elevator Restriction
Mount the Elevator Restriction Unit
Wiring
Set the Elevator Restriction Unit ID
Wire the RS-485 Connection
Wire the Optional TCP/IP Network Connection
Connect the Power and Ground
Update the Firmware
Configure the System
Unit
Version 1.2