Table of Contents
Advertisement
HP-IB Addresses
of the desired test, followed by IHz) to perform the test one time, or
(selection 0), the program will run each of the tests in sequence,
skipping those tests that cannot be performed with the available test
equipment.
Test results are printed or displayed at the completion of each
individual test. Once a particular test is completed, the test summary
displays are updated to reflect whether the test passed.
Figure 5-3. RF Input and Calibration Controls
dual bus systems, the select code for the test equipment is 7 and the
select code for the instrument under test is 8. (The address for the HP
the test equipment is 7 and the select code for the instrument under
test is 7.
Equipment
Frequency Synthesizer
Pulse Generator'
System DVM
Synthesized Sweeper
Measuring Receiver
HP-IB Printer
1 Required to test Option 462 Impulse Bandwidth.
F R E Q . Z E R O
F R E Q . Z E R O
CAL
OUTPUT
HP Model
HP 3335A
HP 8112A or HP 8116A
HP 3455 or HP 3456A
HP 8340A/B
HP 8902A
Address
04
16
22
19
14
01
Advertisement
Table of Contents
