10. Connect cable W31 between IF-Display section 52 and RF section
J6. See Figure 2-l 1.
11. Connect cable W30 between IF-Display section Jl and RF section
J 2
Figure 2-11. Rear-Panel Cable Connections
12. Determine the ac line voltage to be used.
13. On each instrument section, slide open the power module's fuse
door (located on the rear panel). See Figure 2-12. Push the fuse-
pull lever to the left. Remove the fuse.
w 3 1
w 3 7
W38
Installation 2-13