Table of Contents
Advertisement
FREQ REFERENCE
Connector
Frequency
Amplitude
Phase Noise and Spurious Signals Analyzer performance will be degraded unless
outputs
Display Outputs
Recorder Outputs
SWEEP
EXT
X, Y, and Z outputs for auxiliary CRT displays. Compatible with
HP 1300 series displays.
4mplitude
X
Y
BLANK
X
Y
Z
Outputs to drive all current HP X-Y recorders using positive pencoils
or TTL penlift input.
and VIDEO outputs with 0,O and 10,l V respectively, for adjusting X-Y
recorders.
A voltage proportional to the horizontal sweep of the frequency
sweep generator.
Connector BNC female, rear panel
Amplitude 0 V for left edge, + 10 V for right edge
Impedance 1.7 kdl nominal
500, nominal
5
MHz f25 Hz or 10 MHz f50 Hz
frequency reference phase-noise and spurious signals
are 1140 dBc/Hz, referred to 10 MHz at a 100 Hz
1 V for full deflection
1 V for full deflection
0 to 1 V intensity modulation, -1 V blank
TTL level >2.4 V for blanking.
Compatible with most oscilloscopes.
ns
ns
ns
and
keys calibrate the recorder SWEEP
[
UPPER
Advertisement
Table of Contents
