Table of Contents
Advertisement
4. A blink will resume. The red LED blinking indicates the motion detection
LED is active (default). The green LED blinking indicates the LED is
inactive. Tapping the teach button will toggle between these two
states.
5. Save and exit by press and holding the teach button for 5 seconds.
Energy Code Compliance
California Energy Commission Title 24
The MOS-MT sensor is built in an ISO9001 certified facility and is RoHS compliant
Agency Listings
FCC Part 15.231 (902 MHz models only)
Contains FCC ID: STM300U
The enclosed device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(I.) this device may not cause harmful interference and
(ii.) this device must accept any interference received, including
interference that may cause undesired operation.
IC RSS-210 (902 MHz models only)
Contains IC: 5713A-STM300U
CE (868 MHz models only)
CE Marking
ARIB STDT108 (928MHz models only)
Complies with the Japanese radio law and is certified according to
ARIB STDT108. This device should not be modified (otherwise the
granted designation number will become invalid)
End of life: Must be taken apart to recycle: Plastic case - 7 / Remove battery / Remove
PCB assembly
For more information see the programming guide:
https://www.echoflexsolutions.com/files/8DC-5757-MOS-MT-Programming-Guide.pdf
Copyright 2020 Echoflex Solutions, Inc. | Specifications subject to change without notice.
Echoflex Solutions
38924 Queens Way, Unit #1, Squamish, BC, V8B 0K8, Canada
echoflexsolutions.com
8
8DC-5733-2.0
Document Part # 8188M21-5733-1 Rev A
n
n
Scan the QR code to see the programming guide
+1 778-733-0111
n
R 206-000372
06/20
n
Advertisement
Table of Contents
