Table of Contents
Advertisement
blinks, hold the teach button for 6 seconds to select occupancy
duration select.
A press and release of the button will allow you to scroll through the settings
of a repeated blink pattern as shown in the table below. The default
duration is 15 minutes.
Occupancy Duration
To select a setting, press and hold the teach button for 6 seconds when the
desired LED pattern is blinking. To exit without saving, allow the test to time-
out in 60 seconds.
The EEP select mode allows the user to change from EnOcean's Variable
Length Data EEP of D2-14-52 (Sound, Pressure, Illumination, Presence and
Temperature Sensor) to a Generic Profile telegram.
To enter EEP select mode, press and hold the teach button until the green
LED begins to blink (about 6 seconds).
1. A quick press and release of the button at this point will allow you to
select between test modes. Pressing and releasing the teach button
scrolls through the LED indicators. When the red and blue(A) LEDs are
blinking, press and hold the teach button again for 6 seconds to enter
PIR Audio /EEP configuration mode.
2. A quick press and release of the button at this point will allow you
to select between sub menu modes. When the red and blue(A) LEDs
repeats double blinks, hold the teach button for 6 seconds to select
EEP select mode.
A press and release of the button will allow you to toggle between the two
options: Double blue(A) and red blink to select the VLD EEP - D2-14-52 or
Single blue(A) and red blink to select a Generic Profile telegram.
To select a setting press and hold the teach button for 6 seconds when the
desired LED pattern is blinking. To exit without saving, allow the test to time-
out in 60 seconds.
Occupancy LED Indication Enable/Disable
Note: The settings do not take effect until you save and exit.
1. Enter Test mode as usual, press and hold the teach button until the
green LED begins to blink (about 6 seconds).
2. A quick press and release of the button at this point will allow you to
select between test modes. When the green and blue(A) LEDs are both
blinking simultaneously, go to step 3.
3. Press and hold the teach button again for about 6 seconds until they
stop blinking.
Disabled
5 minutes
10 minutes
15 minutes
20 minutes
25 minutes
Indication- Red LED
1 blink
2 blinks
3 blinks
4 blinks
5 blinksg
6 blinks
7
Advertisement
Table of Contents
